Suunto CORE Guide de l'utilisateur télécharger pdf (Page 30)

2. Start, stop and restart it with [Start Stop].

3. Keep [+] pressed to reset.

Possible real life situation: Measuring your climbing

You are about to start climbing a mountain that is 3, 280 feet (1000 m) high. You

want to be able to check your progress as you climb, so you activate the altitude

difference measurer on your Suunto Core. You start climbing, checking your altitude

occasionally to see how far you are from the next check point. At some point you

start to get tired. You check your altitude, and see that there’s still a lot of climbing

ahead. Maybe you need to rethink your next check point.

7.5.2 Recording logs

The log recorder stores all your movements in altitude between the start and

stop times. If you are engaged in an activity in which your altitude changes,

you can record the altitude changes and view the stored information later.

You can also set altitude marks (laps), allowing you to view the duration and

ascent/descent height between your previous mark and current mark. Your

marks are stored in memory and you can access them later.

To record a log:

1. In the ALTI & BARO mode, select the log recorder view.

2. Start, stop and restart it with [Start Stop].

3. When you are recording a log, set laps with [+].

4. Keep [+] pressed to reset (this can only be done when the recorder is

stopped).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 57 58

Pas de commentaire

Suunto CORE Guide de l'utilisateur Page 30